I’m the middle of laziness… Actually I want to finish my Gainclone LM1875 project, but it will consume a lot of my brainpower 😉 But I don’t want to waste this weekend doing nothing. So I just test my Mini Regulator for my TentLabs XO2 Reclock Module.

Luckily, I still have old transformer, rated around 1A with 15 VAC output (tested around 15.3 VAC).

I connect the Mini Regulator to the transformer and check the VDC output. The green LED lit means everything is OK 😉 The VDC measured around 11.83 VDC. A little bit lower than my expected 12 VDC output but this should be fine. I will try with higher transformer later (16-18 VAC).